Відео

Love it...I know a few B&B owners who would love to have monogrammed notebooks in their gift shops. This will sell in my craft boutique as well...

My favorite was the box opener

We recently purchased a 100 watt C02 laser, enclosed cabinet with a 24” x 48” bed (our first laser). I’ve learned more from your channel than all the rest put together. What area are you from? Would you consider a couple hour tutoring session (with pay)?

Thanks for this video. Planning to order a XTOOL S1 to add to my 3d printing business, so these are excellent ideas. Ill be ordering the letherette keytags and targeting local real estate agents.

Hi I do not have the word Edit near the wecreat logo on the left

Replace the words laser engraving with family portraits, transmission rebuilds, pet grooming, dog walking, etc.etc. This is all just excellent sound advice. Been there and done that and have nothing I can honestly add. Start small with the resources you can reach and the talent you have. There’s a sweet spot in small business where you look professional without having a storefront and employee overhead.

Just wondering if this works well with a diode laser? I have an xTool S1 40W, did some engraving at 50% power and 300mm/s. I got a nice engrave, you can feel the cavity with your fingers, but I seem to be just burning the paint off when I spread it in. I am using your sample pack of paint btw. I finally did a material test grid, 10-50% in 5% increments, from 100-300 mm/s in 50mm increments. I got engraving all the way from very light to very deep. I spread some paint over grid and then reran the test with the same settings, thinking I would find something that worked. Nope, just burned it all up expect for a few small flecks of paint here and there. Hence my question wondering if you were using a CO2 laser and maybe diode lasers don't work as well? Update: I answered my own issue. I did some more reading and decided I was completely off in my power/speed ranges. I did another test and restricted speed to 20-140 mm/s and power to 3-12%, and got much better results. It was interesting to see the noticeable difference the various combinations produced. There seems to be a sweet spot where the laser has enough time/power to melt the paint without burning it. You could also differences in the "shininess" of the result as well. No substitute for a test run with this technique! With my 40W S1 I think I will settle on 80 mm/s and 7% power.

Love the video

The more you buy, the less you pay. How many do I have to buy in order to get them for FREE? :

Enjoyed your Video! Great information. I know the contest is over. But it was a toss up of the box cutter and the cuff link box.

I'm looking to purchase a filter for a new laser I am about to buy and that Pure Aire unit looks like it would fit the bill. What does the filter sourcing process look like given it's a direct-from-China model? What do the filters cost?

Why have I never thought to use legos as a jig? Absolutely genius!

Is there a way to clean the screen after this for future use?

Hello, I’m new to your channel, and I like your laser engraving reviews. I really liked the wood engraved wallet. I use a regular wallet and would like to try that wallet. Im a fan of your channel now, thank you. My name is Sid by the way. AWESOME!

Hello, I’m new to your channel, and I like your laser engraving reviews. I really liked the wood engraved wallet. I use a regular wallet and would like to try that wallet. Im a fan of your channel now, thank you. My name is Sid by the way. AWESOME!

Thank you for the information!

Boy that beard looks so well groomed

I would disagree about your message to not use a centrifugal blower. However I would agree to not use one of the Cheap Chinese versions. you need a high quality one. They can provide the highest airflow and power for its size. and the motor is not involved with the air flow so it won't fail due to particles getting into it from the exhaust air. These are the same blowers we have in all our central heat an air systems, for all those reasons. and because it is so powerful you can use longer runs and place it outside.

Do you know if the conveyor will work with skateboards?? 🙏🏾

Just found your channel. I have a Neje 7 watt laser (that's really like a 3 watt) and have been wanting to upgrade to a bigger one. Love all these items you showed, to this day I have only been doing cutting boards. Now I can expand. Do you have a video of lasers for people on a budget?

I really enjoy your videos, thank you for being so humble and sharing your passion with us newbies to learn from. 😊

I don't really want a laser business. I bought a diode laser in the hopes that I will have a lot of fun. I'll make neat gifts for friends and family, and maybe be able to sell enough stuff to upgrade to a fiber laser. If I get a fiber laser then I'll get really serious about selling.

I'm in several diode laser facebook groups, and the biggest thing I see are people that want a laser businee, but they don't want to learn anything, or make any effort. They want designs free. They want someone to tell them how to do it. The idea of burning a test grid on a material is unthinkable to them. "Just tell me ythe settings!"....

Will the hats be machine washable with real leather? What about if using PU leather?

The leatherettes were a good idea.

Thanks for the video. The options you listed....can they be used with a diode laser.

This video is a huge help, thank you for giving a new laser owner a leg up for making money.

How does it do with black materials against the black belt?

CAN YOU ACTUALLY SCREEN PRINTE USING POLYESTER PLASTIC SHEET ?

This is solid gold for someone like me (new to the laser game) I have saved this so that I can reference it later on. Thank you very much!

Love the leather patches, and the keychains. Can set up an array and do them in bulk!

Can the challenge coin be engraved with a diode laser?

I am so happy to have found you. Thank you

I started out doing more arts and crafts stuff with a Wecreat. Should I look at investing in a different laser engraver for other stuff, more engraving opportunities. My $$ comes right now from dungeons and dragons stuff

Excellent informative video. Thanks a lot!

21 minutes well spent.

What type off laser engraver are you using

Do you always make sure to have a 1/8th inch gap regardless of what medium you're printing on, like bags, shirts, boxes, cards, etc.?

you forgot to include a link to those hipster hats... 👀

Love the engraved bullet thermos & the flashlight in a box. Also, the circular wooden magnetic bottle opener, with the engraved saying is an awesome gift (never saw something like that - LOVE it!) Lots of cool products that would make great gifts! Enjoyed your show. Subscribed : )

hello from France and well done. What software do you use to burn?

What air compressor was he using at 12:43 after he engraved the screen??

Your roller is awesome, where can l buy one like that?

My business partner and I started a laser business about 6 months ago but we started expanding in far too many directions. We now do sublimation, vinyl, HTV, clothing, hats, tumblers, etc we just recently added custom embroidered patches and 3D printing. If we fail it’s likely cuz we have our fingers in too many pies.

Hi Michael. I think I’m in your area, Woodstock GA. I’m a hobbies, I make stuff to give away. Love your content.

Just got my first proper laser engraver (I was using a Wicked Lasers' LaserCube up until now!) and this is valuable information, I can't wait to try it out myself.

Can we be friends?